125
APTUS
• Satellite Information: displays the current satellite’s name, longitude position,
and satellite skew of the satellite in the library. Tick the Edit Satellite checkbox
to edit the current satellite information.
• Tracking Common Information: displays the current LNB local oscillator
frequency that is in use and the corresponding voltage supplied. Selects
the tracking mode (DVB / NBD) to be used and sets polarization (Horizontal
/ Vertical) for the RX pol and the TX pol.
• DVB and NBD Tracking Transponder: sets the tracking transponder
information for either DVB trac ing mode (Verication Type, Frequency,
Symbol rate, and NID) or NBD tracking mode (Frequency and bandwidth).
• LNB Local Frequency: Displays or sets the LNB's local frequency and its
corresponding LNB voltage supplied. You may select pre-programmed
LNB LO settings from the drop down list. This procedure is the same for
both the Intellian Global VSAT PLL LNB and any other LNB.
• Satellite Library: you are able to edit, add, and delete the satellite library.
Add Satellite: adds the satellite information as dened in the current
settings.
Edit Satellite: edits the satellite information of the selected satellite.
Delete Satellite: deletes the selected satellite from the library.
Get Data From ACU: pulls the satellite information from the ACU.
Load Satellite: uploads the satellite information to the ACU.
Open from PC: opens the satellite library le (File format: *.ilf) from
the supplied CD or from the external hard drive/PC.
Upload to ACU: uploads the satellite library to ACU.
Save to PC: saves the current library settings to PC.
To Next Page
Loading...
Need help?
General
