111
APTUS
Figure 90. Toolbar
Quick Buttons
Files
Toolbar Menu
With the Toolbar menu, users can quickly and easily access the most commonly
used functions of Aptus
®
through the toolbars and icons at the top of the screen.
Setup: enters Setup mode.
Restart: exits Setup mode and restarts the antenna.
Reboot: reboots the antenna.
Get Ant. Info: obtains the information stored in the antenna
Save Satellite: saves the current bow offset only if the antenna is tracking a
satellite. Using this function greatly reduces satellite acquisition time after an
antenna restart.
Backup: Backups the antenna information to the ACU or PC.
• To ACU: backs up the antenna information to ACU (le format:*.ibf).
• To PC: backs up the antenna information to PC (le format: *.rpt).
Restore: restores the antenna by using the stored information in
ACU or PC.
• From ACU: restores the antenna by using the stored information
in the ACU.
• From PC: restores the antenna by using the stored information in the PC.
Load Cong. : loads the antenna conguration le (le format: *.cfg).
The conguration le includes the antenna control parameters
which are pre-loaded at the factory and should only be changed
by an authorized service technician. Improper setting of these pa-
rameters will cause your system to perform improperly.
To Next Page
Loading...
Need help?
General
