83
OPERATION INSTRUCTION
Detect & tracking level
Set detect & tracking NBD
6. Set DETECT NBD and TRACKING NBD when the NBD (Narrow band detection)
mode of TRACKING SIGNAL is used (Range : 1-200). DETECT NBD sets the satellite
signal detection level and TRACKING NBD sets the satellite signal tracking level.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the
selected character. Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the parameter. Press the BACK key to select the parameter
you wish to edit and press the BACK key again to save or abort and return to the
main display.
KU DETECT NBD KU TRACKING NBD
040 020
C DETECT NBD C TRACKING NBD
040 020
Noise Level
Detect Level
Tracking Level
TRACKING DVB/NDB
Peak Level
DETECT DVB/NDB
To Next Page
Loading...
Need help?
General
