Interacoustics Eclipse - 3.7 Making a neuro latency recording; 3.7.1 Electrode montage; 3.7.2 Editing of neuro latency recordings

Eclipse Additional Information Page 44
Under the Edit tab you can choose display digital filtering of the measurement (which can be done be-
fore/during and after the recording).
A default display filter can be set in the System Setup for the individual Auto Protocols. This can if needed be
changed temporary anytime under the Edit tab later.
To see later what hardware filters were used, click a curve and see under the Edit tab on the top or on the
Print out the hardware High and Low Pass filters are printed (see left column) and display filters - right col-
umn).