Chapter 4: Web configuration
146 NS3552-8P-2S-V2 User Manual
The page includes the following fields:
Configuration identification
Object Description
Configuration Name The name identifiying the VLAN to MSTI mapping. Bridges must
share the name and revision, as well as the VLAN-to-MSTI mapping
configuration in order to share spanning trees for MSTI's. (Intra-
region). The name is a maximum of 32 characters.
Configuration Revision The revision of the MSTI configuration named above. This must be
an integer between 0 and 65535.
MSTI mapping
Object Description
MSTI The bridge instance. The CIST is not available for explicit mapping,
as it will receive the VLANs not explicitly mapped.
VLANs Mapped The list of VLAN's mapped to the MSTI. The VLANs must be
separated with a comma and/or space. A VLAN can only be mapped
to one MSTI. A unused MSTI should be left empty (i.e., not have any
VLANs mapped to it).
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
MSTI ports configuration
The MSTI Port Configuration page permits the user to inspect and change the current
STP MSTI port configurations. A MSTI port is a virtual port, which is instantiated
separately for each active CIST (physical) port for each MSTI instance configured and
applicable for the port. The MSTI instance must be selected before displaying actual
MSTI port configuration options.
This page contains MSTI port settings for physical and aggregated ports. The
aggregation settings are stack global.
To Next Page
Loading...
