Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 147
The page includes the following fields:
MTSI port configuration
Object Description
Select MSTI Select the bridge instance and set more detail configuration.
The page includes the following fields:
MSTx MTSI port configuration
Object Description
Port The switch port number of the corresponding STP CIST (and MSTI) port.
Path Cost Controls the path cost incurred by the port. The Auto setting sets the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The
path cost is used when establishing the active topology of the network. Lower
path cost ports are chosen as forwarding ports in favor of higher path cost
ports. Valid values are in the range 1 to 200000000. All means all ports wil
have one specific setting.
Priority Controls the port priority. This can be used to control priority of ports having
identical port cost. All means all ports wil have one specific setting.
To Next Page
Loading...
