Interlogix NS3552-8P-2S-V2 - Page 17

Chapter 1: Introduction
NS3552-8P-2S-V2 User Manual 15
Back pressure for half-duplex
Jumbo Frame
9
K bytes
Reset Button
<
5 seconds: System reboot
>
5 seconds: Factory Default
Enclosure
IP30 aluminum case
Installation
DIN rail kit and wall
-mount kit
Connector
Removable 6
-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6
-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm
One relay output for power failure. Alarm relay current carry ability:
1A @ 24
VDC
Digital Input
Two Digital Inputs (DI)
Level 0:
-24~2.1 V (±0.1 V)
Level 1: 2.1~24 V (±0.1 V)
Input load to 24 VDC, 10 mA max.
Digital Output
Two Digital Outputs (DO)
Open collector to 24 VDC, 100 mA max.
LED
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
Ring Owner (Green)
Per
10/100/1000T RJ45 Ports:
PoE in-use (Orange)
1000 LNK/ACT (Green)
Per SFP Interface:
100 LNK/ACT (Orange)
1000 LNK/ACT (Green)
Dimensions
152 x 107
x 72 mm
Weight
1.684 kg
Power Requirement
D
C 48 V
Power
Consumption
31.9
W / 108.78 BTU (full loading without PoE function)
306
W / 1043.46 BTU (full loading with PoE function)
ESD Protection
6K VDC
EFT Protection
6K VDC
Power over Ethernet
PoE Standard
IEEE 8
02.3af/802.3at PoE / PSE
PoE Power Supply Type
End
-span