Interlogix NS3552-8P-2S-V2 - Page 18

Chapter 1: Introduction
16 NS3552-8P-2S-V2 User Manual
PoE Power Output
IEEE 802.3af
Standard
Per port 56 VDC, 350 mA. Max. 15.4 W.
IEEE 802.3at Standard
Per port 56 VDC, 590 mA. Max. 30.8 W.
Power Pin Assignment
End
-span: 1/2(-), 3/6(+)
PoE Power Budget
2
40 W maximum (depending on power input)
Max. number of Class 2
PD
8
Max. number
of Class 3
PD
8
Max. number of Class 4
PD
8
Layer 2
Functions
Basic Management
Interfaces
Console; Telnet; Web browser; SNMP v1, v2c
Secure Management
Interfaces
SSH, SSL, SNMP v3
Port
Configuration
Po
rt disable / enable
Auto
-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow
control disable/enable
Bandwidth control on each port
Power saving mode control
Port Status
Display each port’s
speed duplex mode, link status, flow control status, auto-
negotiation status, trunk
status.
Port Mirroring
TX / RX / both
Many
-to-1 monitor
VLAN
802.1Q tagged
-based VLAN, up to 255 VLAN groups
Q
-in-Q tunneling
Private VLAN
Edge (PVE)
MAC
-based VLAN
Protocol
-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
U
p to 256 VLAN groups, out of 4096 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP
/static trunk
Five groups with eight
ports per trunk
QoS
Traffic classification based,
strict priority and WRR
8
-level priority for switching
–
Port number
–
802.1p priority
–
802.1Q VLAN tag
–
DSCP/ToS field in IP packet