Interlogix NS3552-8P-2S-V2 - Page 187

Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 185
Object Description
Egress There are the following configurable parameters for Egress side –
Remap DP0 Controls the remapping for frames with DP level 0.
Remap DP1 Controls the remapping for frames with DP level 1.
Remap DP0 The Configuration All with available values will assign to whole DSCP
values.
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges from 0 to 63.
Remap DP1 The Configuration All with available values will assign to whole DSCP
values.
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges from 0 to 63.
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
DSCP classification
The DSCP Classification page permits mapping a DSCP value to a QoS Class and
DPL value.