Chapter 4: Web configuration
186 NS3552-8P-2S-V2 User Manual
The page includes the following fields:
Object Description
QoS Class Available QoS Class values range from 0 to 7. QoS Class (0-7) can be
mapped to followed parameters.
DPL Actual Drop Precedence Level.
DSCP Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding
QoS Class and DPL value
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
QoS control list
The QoS Control List Configuration page shows the QoS Control List (QCL), which is
made up of the QCEs. Each row describes a QCE that is defined. The maximum
number of QCEs is 256 on each switch. Click on the lowest plus sign to add a new
QCE to the list.
The page includes the following fields:
Object Description
QCE# Indicates the index of QCE.
Port Indicates the list of ports configured with the QCE.
DMAC Specify the type of Destination MAC addresses for incoming frames.
Selections include:
Any: All types of Destination MAC addresses are allowed. Default value.
Unicast: Only Unicast MAC addresses are allowed.
Multicast: Only Multicast MAC addresses are allowed.
Broadcast: Only Broadcast MAC addresses are allowed.
SMAC Displays the OUI field of Source MAC address (i.e., the first three octets (in
bytes) of the MAC address).
Tag Type Indicates tag type. Selections include:
Any: Match tagged and untagged frames. Default value.
Untagged: Match untagged frames.
To Next Page
Loading...
