Interlogix NS3552-8P-2S-V2 - Page 210

Chapter 4: Web configuration
208 NS3552-8P-2S-V2 User Manual
Object Description
State Specify the port state of this port. Selections include:
Enabled: To reopen ports by changing the volatile port configuration of the
ACL user module.
Disabled: To close ports by changing the volatile port configuration of the
ACL user module.
The default value is Enabled. All means all ports will have one specific
setting.
Counter Counts the number of frames that match this ACE.
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
• Click Refresh to refresh the page. Any changes made locally are undone.
• Click Clear to clear the counters.
ACL rate limiter configuration
Configure the rate limiter for the ACL of the industrial managed switch on the ACL Rate
Limiter Configuration page.