Interlogix NS3552-8P-2S-V2 User Manual

Chapter 2: Installation
NS3552-8P-2S-V2 User Manual 21
Front panel
Reset button
Located on the upper left side of the front panel, the reset button is designed to reboot
the industrial managed switch without turning the power off and on. The following is the
summary table of the reset button functions:
Reset button pressed and releas
ed Function
< 5 seconds: System reboot
Reboots the industrial managed switch
> 5 seconds: Factory default
Resets the industrial managed switch to
factory default configuration. The switch then
reboots and loads the default settings as
shown below:
Default Username: admin
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
LED indicators
The front panel LEDs indicate port link status, data activity, and system power.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English