EasyManuals Logo

Interlogix NS3552-8P-2S-V2 User Manual

Interlogix NS3552-8P-2S-V2
511 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #249 background imageLoading...
Page #249 background image
Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 247
The page includes the following fields:
Object Description
Mode Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
Delete Check to delete the entry. It will be deleted during the next apply .
VLAN ID Indicates the VLAN ID for the access management entry.
Start IP address Indicates the start IP address for the access management entry.
End IP address Indicates the end IP address for the access management entry.
HTTP/HTTPS Indicates the host can access the switch from the HTTP/HTTPS interface
and that the host IP address matched the entry.
SNMP Indicates the host can access the switch from the SNMP interface and that
the host IP address matched the entry.
TELNET/SSH Indicates the host can access the switch from the TELNET/SSH interface
and that the host IP address matched the entry.
Buttons
• Click Add New Entry to add a new access management entry.
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
Access management statistics
The Access Management Statistics page provides statistics for access management.

Table of Contents

Other manuals for Interlogix NS3552-8P-2S-V2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Interlogix NS3552-8P-2S-V2 and is the answer not in the manual?

Interlogix NS3552-8P-2S-V2 Specifications

General IconGeneral
BrandInterlogix
ModelNS3552-8P-2S-V2
CategorySwitch
LanguageEnglish

Related product manuals