Interlogix NS3552-8P-2S-V2 - Page 337

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 335
Set 10Mbps (half duplex) speed for port1
NS3552
-8P-2S-V2:/>
port mode 1 10hdx
Port Flow Control
Description:
Set or show the port flow control mode.
Syntax:
Port Flow Control [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable flow control
disable : Disable flow control
(default: Show flow control mode)
Default Setting:
Disable
Example:
Enable flow control function for port1
NS3552
-8P-2S-V2:/>port flow control 1 enable
Port State
Description:
Set or show the port administrative state.
Syntax:
Port State [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port
disable : Disable port
(default: Show administrative mode)
Default Setting:
Enable
Example:
Disable port1
NS3552
-8P-2S-V2:/>port state 1 disable
Port Maximum Frame
Description:
Set or show the port maximum frame size.
Syntax:
Port MaxFrame [<port_list>] [<max_frame>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<max_frame>: Port maximum frame size (1518-9600), default: Show maximum
frame size
Default Setting: