Interlogix NS3552-8P-2S-V2 - Page 339

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 337
clear : Clear port statistics
packets : Show packet statistics
bytes : Show byte statistics
errors : Show error statistics
discards : Show discard statistics
filtered : Show filtered statistics
0..7 : Show priority statistics
(default: Show all port statistics)
up : Show ports, which are up
down : Show ports, which are down
(default: Show all ports)
Port VeriPHY
Description:
Run cable diagnostics.
Syntax:
Port VeriPHY [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Port SFP
Description:
Show SFP port information.
Syntax:
Port SFP [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show SFP information for port9-10
NS3552
-8P-2S-V2:/>
port sfp
Port Type Speed Wave Length(nm) Distance(m)
----
-------------- -------- --------------- -----------
9 1000Base
-LX 1000-Base 1310 10000
10 1000Base-LX 1000-Base 1310 10000
Port Description
Description:
Set or show Port Description.
Syntax:
Port Description [<port_list>] [<descr_text>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<descr_text>: Text of port description