Interlogix NS3552-8P-2S-V2 - Page 358

Chapter 6: Command line mode
356 NS3552-8P-2S-V2 User Manual
once. It also used a following legally IPv4 address. For
example,'::192.1.2.34'.
<end_ipv6_addr> : End IPv6 address.
IPv6 address is in 128-bit records represented as eight fields of up to
four hexadecimal digits with a colon separating each field (:). For
example,'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing
multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also uses a following legally IPv4 address. For
example,'::192.1.2.34'.
web : Indicates that the host can access the switch from HTTP/HTTPS
snmp : Indicates that the host can access the switch from SNMP
telnet : Indicates that the host can access the switch from TELNET/SSH
Example:
Add access management list from 2001::0001 to 2001::0100 via web interface.
NS3552
-8P-2S-V2:/>
security
switch access add 2001::0001 2001::0100
web
Security Switch Access Delete
Description:
Delete access management entry.
Syntax:
Security Switch Access Delete <access_id>
Parameters:
<access_id>: entry index (1-16)
Example:
Delete access management ID 1
NS3552
-8P-2S-V2:/>security switch access delete 1
Security Switch Access Lookup
Description:
Lookup access management entry.
Syntax:
Security Switch Access Lookup [<access_id>]
Parameters:
<access_id> : entry index (1-16)
Example:
Lookup access management entry.
NS3552
-8P-2S-V2:/>
security
switch access lookup 1
Security Switch Access Clear
Description:
Clear access management entry.
Syntax:
Security Switch Access Clear