Interlogix NS3552-8P-2S-V2 - Page 359

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 357
Example:
Clear access management entry.
NS3552
-8P-2S-V2:/>
security
switch access clear
Security Switch Access Statistics
Description:
Show or clear access management statistics.
Syntax:
Security Switch Access Statistics [clear]
Parameters:
clear: Clear access management statistics
Example:
Show access management statistics.
NS3552
-8P-2S-V2:/>
security
switch access statistics
Access Management Statistics:
-----------------------------
HTTP Receive: 0 Allow: 0 Discard: 0
HTTPS Receive: 0 Allow: 0 Discard: 0
SNMP Receive: 0
Allow: 0 Discard: 0
TELNET Receive: 0 Allow: 0 Discard: 0
SSH Receive: 0 Allow: 0 Discard: 0
Security Switch SNMP Configuration
Description:
Show SNMP configuration.
Syntax:
Security Switch SNMP Configuration
Security Switch SNMP Mode
Description:
Set or show the SNMP mode.
Syntax:
Security Switch SNMP Mode [enable|disable]
Parameters:
enable : Enable SNMP
disable: Disable SNMP
(default: Show SNMP mode)
Default Setting:
enable
Example:
Disable SNMP mode.
NS3552
-8P-2S-V2:/>security switch snmp mode disable