Interlogix NS3552-8P-2S-V2 - Page 364

Chapter 6: Command line mode
362 NS3552-8P-2S-V2 User Manual
Security Switch SNMP Trap Inform Retry Times
Description:
Set or show the SNMP trap inform retry times.
Syntax:
Security Switch SNMP Trap Inform Retry Times [<retries>]
Parameters:
<retries>: SNMP trap inform retransmited times (0-255)
(default: Show SNMP trap inform retry times)
Default Setting:
5
Example:
Set SNMP trap inform retry times in 10.
NS3552
-8P-2S-V2:/>
security
switch
snmp
trap inform retry times 10
Security Switch SNMP Trap Probe Security Engine ID
Description:
Show SNMP trap security engine ID probe mode.
Syntax:
Security Switch SNMP Trap Probe Security Engine ID [enable|disable]
Parameters:
enable : Enable SNMP trap security engine ID probe
disable: Disable SNMP trap security engine ID probe
(default: Show SNMP trap security engine ID probe mode)
Default Setting:
enable
Example:
Disable SNMP trap probe security engine ID
NS3552
-8P-2S-V2:/>
security
switch
snmp
trap probe security engine id
disable
Security Switch SNMP Trap Security Engine ID
Description:
Set or show SNMP trap security engine ID.
Syntax:
Security Switch SNMP Trap Security Engine ID [<engineid>]
Parameters:
<engineid>: Engine ID, the format may not be all zeros or all 'ff'H and is restricted
to 5 - 32 octet string
Example:
Set the SNMP trap security engine ID
NS3552
-8P-2S-V2:/>
security switch
snmp
trap security engine id
800007e5017f000011
Security Switch SNMP Trap Security Name
Description:
Set or show SNMP trap security name.