Interlogix NS3552-8P-2S-V2 - Page 372

Chapter 6: Command line mode
370 NS3552-8P-2S-V2 User Manual
Security Switch RMON Statistics Lookup
Description:
Show RMON Statistics entries.
Syntax:
Security Switch RMON Statistics Lookup [<stats_id>]
Parameters:
<stats_id>: Statistics ID (1-65535).
Security Switch RMON History Add
Description:
Add or modify RMON Hisotry entry. The entry index key is <history_id>.
Syntax:
Security Switch RMON History Add <history_id> <data_source> [<interval>]
[<buckets>]
Parameters:
<history_id> : History ID (1-65535).
<data_source>: The OID that indicates that the ifIndex in ifEntry.
The value should be like .1.3.6.1.2.1.2.2.1.1.xxx.
<interval> : Sampling interval (1-3600) (default: 1800).
<buckets> : The maximum data entries associated this History control entry
stored in RMON(1-65535) (default: 50).
Security Switch RMON History Delete
Description:
Delete RMON Hisotry entry. The entry index key is <history_id>.
Syntax:
Security Switch RMON History Delete <history_id>
Parameters:
<history_id> : History ID (1-65535).
Security Switch RMON History Lookup
Description:
Show RMON History entries.
Syntax:
Security Switch RMON History Lookup [<history_id>]
Parameters:
<history_id> : History ID (1-65535).
Security Switch RMON Alarm Add
Description:
Add or modify RMON Alarm entry. The entry index key is <alarm_id>.
Syntax:
Security Switch RMON Alarm Add <alarm_id> <interval> <alarm_vairable>
[absolute|delta] <rising_threshold> <rising_event_index> <falling_threshold>
<falling_event_index> [rising|falling|both]
Parameters: