Interlogix NS3552-8P-2S-V2 - Page 379

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 377
Reauth. Period : 3600
EAPOL Timeout : 30
Age
Period : 300
Hold Time : 10
RADIUS QoS : Disabled
RADIUS VLAN : Disabled
Guest VLAN : Disabled
Guest VLAN ID : 1
Max. Reauth Count: 2
Allow Guest VLAN if EAPOL Frame Seen: Disabled
Port Admin State Port State
Last Source Last ID
----
------------------ --------------------- ----------------- ------------------
1 Force Authorized Globally Disabled - -
Security Network NAS Mode
Description:
Set or show the global NAS enabledness.
Syntax:
Security Network NAS Mode [enable|disable]
Parameters:
enable : Globally enable 802.1X
disable: Globally disable 802.1X
(default: Show current 802.1X global enabledness)
Default Setting:
disable
Example:
Enable IEEE802.1X function
NS3552
-8P-2S-V2:/>
security
network
nas mode enable
Security Network NAS State
Description:
Set or show the port security state.
Syntax:
Security Network NAS State [<port_list>]
[auto|authorized|unauthorized|single|multi|macbased]
Parameters:
<port_list>: Port list or 'all', default: All ports
auto : Port-based 802.1X Authentication
authorized : Port access is allowed
unauthorized: Port access is not allowed
single : Single Host 802.1X Authentication
multi : Multiple Host 802.1X Authentication
macbased : Switch authenticates on behalf of the client
(default: Show 802.1X state)
Default Setting:
none
Example: