Interlogix NS3552-8P-2S-V2 - Page 380

Chapter 6: Command line mode
378 NS3552-8P-2S-V2 User Manual
Show the port 1 security state.
NS3552
-8P-2S-V2:/>
security
network nas state 1
Port Admin State Port State
Last Source Last ID
----
------------------ --------------------- ----------------- ------------------
1 Force Authorized Globally Disabled - -
Security Network NAS Reauthentication
Description:
Set or show Reauthentication enabledness.
Syntax:
Security Network NAS Reauthentication [enable|disable]
Parameters:
enable : Enable reauthentication
disable: Disable reauthentication
(default: Show current reauthentication mode)
Default Setting:
disable
Example:
Enable reauthentication function.
NS3552
-8P-2S-V2:/>
security
network nas reauthentication enable
Security Network NAS ReauthPeriod
Description:
Set or show either global enabledness (use the global keyword) or per-port
enabledness of RADIUS-assigned VLAN.
Syntax:
Security Network NAS RADIUS_VLAN [global|<port_list>] [enable|disable]
Parameters:
global : Select the global RADIUS-assigned VLAN setting
<port_list>: Select the per-port RADIUS-assigned VLAN setting
(default: Show current per-port RADIUS-assigned VLAN enabledness)
enable : Enable RADIUS-assigned VLAN either globally or on one or more ports
disable: Disable RADIUS-assigned VLAN either globally or on one or more ports
(default: Show current RADIUS-assigned VLAN enabledness)
Default Setting:
disable
Example:
Enable RADIUS-assigned VLAN.
NS3552
-8P-2S-V2:/>
security
network nas radius_vlan enable
Security Network NAS EapolTimeout
Description:
Set or show the time between EAPOL retransmissions.
Syntax:
Security Network NAS EapolTimeout [<eapol_timeout>]