Interlogix NS3552-8P-2S-V2 - Page 381

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 379
Parameters:
<eapol_timeout>: Time between EAPOL retransmissions (1-65535 seconds)
(default: Show current EAPOL retransmission timeout)
Default Setting:
30
Example:
Set the time between EAPOL retransmissions for 100sec.
NS3552
-8P-2S-V2:/>
security
network nas eapoltimeout 100
Security Network NAS Agetime
Description:
Time in seconds between check for activity on successfully authenticated MAC
addresses.
Syntax:
Security Network NAS Agetime [<age_time>]
Parameters:
<age_time>: Time between checks for activitiy on a MAC address that succeeded
autentication
(default: Show current age time)
Default Setting:
300
Example:
Set NAS age time in 1000sec
NS3552
-8P-2S-V2:/>security network nas agetime 1000
Security Network NAS Holdtime
Description:
Time in seconds before a MAC-address that failed authentication gets a new
authentication chance.
Syntax:
Security Network NAS Holdtime [<hold_time>]
Parameters:
<hold_time>: Hold time before MAC addresses that failed authentication expire
(default: Show current hold time)
Default Setting:
10
Example:
Set NAS hold time in 100sec
NS3552
-8P-2S-V2:/>security network nas holdtime 100
Security Network NAS RADIUS_QoS
Description:
Set or show either global enabledness (use the global keyword) or per-port
enabledness of RADIUS-assigned QoS.
Syntax: