Interlogix NS3552-8P-2S-V2 - Page 383

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 381
ports
disable: Disable Guest VLAN either globally or on one or more ports
(default: Show current Guest VLAN enabledness)
<vid>: Guest VLAN ID used when entering the Guest VLAN. Use the 'global'
keyword to change it
(default: Show current Guest VLAN ID)
<reauth_max>: The value can only be set if you use the 'global' keyword in the
beginning of the command. The number of times a Request Identity
EAPOL frame is sent without reasponse before considering entering
the Guest VLAN
(default: Show current Maximum Reauth Count value)
<allow_if_eapol_seen>: The value can only be set if you use the 'global' keyword
in the beginning of the command.
disable:The Guest VLAN can only be entered if no EAPOL frames have been
received on a port for the lifetime of the port
enable :The Guest VLAN can be entered even if an EAPOL frame has been
received during the lifetime of the port
(default: Show current setting)
Default Setting:
Disable
Example:
Enable NAS guest VLAN
NS3552
-8P-2S-V2:/>
security
network nas guest_vlan enable
Security Network NAS Authenticate
Description:
Refresh (restart) 802.1X authentication process.
Syntax:
Security Network NAS Authenticate [<port_list>] [now]
Parameters:
<port_list>: Port list or 'all', default: All ports
now: Force reauthentication immediately
Example:
Start NAS authentication now for port 1.
NS3552
-8P-2S-V2:/>security network nas authenticate 1 now
Security Network NAS Statistics
Description:
Show or clear 802.1X statistics.
Syntax:
Security Network NAS Statistics [<port_list>] [clear|eapol|radius]
Parameters:
<port_list>: Port list or 'all', default: All ports
clear : Clear statistics
eapol : Show EAPOL statistics
radius : Show Backend Server statistics
(default: Show all statistics)