Interlogix NS3552-8P-2S-V2 - Page 384

Chapter 6: Command line mode
382 NS3552-8P-2S-V2 User Manual
Example:
Show 802.1X statistics in port 1
NS3552
-8P-2S-V2:/>
security
network nas statistics 1
Port 1 EAPOL Statistics:
Rx Total: 0 Tx Total: 0
Rx Response/Id: 0 Tx Request/Id: 0
Rx Response:
0 Tx Request: 0
Rx Start: 0
Rx Logoff: 0
Rx Invalid Type: 0
Rx Invalid Length: 0
Port 1 Backend Server Statistics:
Rx Access Challenges: 0 Tx Responses: 0
Rx Other Requests: 0
Rx Auth. Successes: 0
Rx Auth. Failures: 0
Security Network ACL Configuration
Description:
Show ACL Configuration.
Syntax:
Security Network ACL Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Security Network ACL Action
Description:
Set or show the ACL port default action.
Syntax:
Security Network ACL Action [<port_list>] [permit|deny] [<rate_limiter>]
[<port_copy>] [<logging>] [<shutdown>]
Parameters:
<port_list> : Port list or 'all', default: All ports
permit : Permit forwarding (default)
deny : Deny forwarding
<rate_limiter>: Rate limiter number (1-15) or 'disable'
<port_copy> : Port number for copy of frames or 'disable'
<logging> : System logging of frames: log|log_disable
<shutdown> : Shut down ingress port: shut|shut_disable
Example:
Show ACL action in port 1
NS3552
-8P-2S-V2:/>
security
network acl action 1
Port Action Rate Limiter Port Copy Mirror Logging Shutdown
Counter