Interlogix NS3552-8P-2S-V2 - Page 387

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 385
Security Network ACL Delete
Description:
Delete ACE.
Syntax:
Security Network ACL Delete <ace_id>
Parameters:
<ace_id>: ACE ID (1-256)
Example:
Delete ACE 1
NS3552
-8P-2S-V2:/>
security
network acl delete 1
Security Network ACL Lookup
Description:
Show ACE, default: All ACEs.
Syntax:
Security Network ACL Lookup [<ace_id>]
Parameters:
<ace_id>: ACE ID (1-256)
Example:
Lookup ACE 1
NS3552
-8P-2S-V2:/>security network acl lookup 1
Security Network ACL Clear
Description:
Clear all ACL counters.
Syntax:
Security Network ACL Clear
Example:
Clear all ACL counters.
NS3552
-8P-2S-V2:/>security network acl clear
Security Network ACL Status
Description:
Show ACL status.
Syntax:
Security Network ACL Status
[combined|static|dhcp|upnp|arp_inspection|ipmc|ip_source_guard|conflicts]
Parameters:
combined : Shows the combined status
static : Shows the static user configured status
dhcp : Shows the status by DHCP
upnp : Shows the status by UPnP
arp_inspection : Shows the status by ARP Inspection
ip_source_guard : Shows the status by IP Source Guard
conflicts : Shows all conflict status