Interlogix NS3552-8P-2S-V2 - Page 388

Chapter 6: Command line mode
386 NS3552-8P-2S-V2 User Manual
(default : Shows the combined status)
Example:
Show ACL status.
NS3552
-8P-2S-V2:/>
security
network acl status
Security Network DHCP Relay Configuration
Description:
Show DHCP relay configuration.
Syntax:
Security Network DHCP Relay Configuration
Example:
Show DHCP relay configuration.
NS3552
-8P-2S-V2:/>
security
network dhcp relay configuration
DHCP Relay Configuration:
=========================
DHCP Relay Mode : Disabled
DHCP Relay Server : NULL
DHCP
Relay Information Mode : Disabled
DHCP Relay Information Policy : replace
Security Network DHCP Relay Mode
Description:
Set or show the DHCP relay mode.
Syntax:
Security Network DHCP Relay Mode [enable|disable]
Parameters:
enable : Enable DHCP relaly mode.
When enable DHCP relay mode operation, the agent forward and to transfer
DHCP messages between the clients and the server when they are not on
the same subnet domain. And the DHCP broadcast message won't flood for
security considered.
disable: Disable DHCP relaly mode
(default: Show flow DHCP relaly mode)
Default Setting:
disable
Example:
Enable DHCP relay mode
NS3552
-8P-2S-V2:/>
security
network dhcp relay mode enable
Security Network DHCP Relay Server
Description:
Show or set DHCP relay server.
Syntax:
Security Network DHCP Relay Server [<ip_addr>]