Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
394 NS3552-8P-2S-V2 User Manual
3 Disabled 1813
4 Disabled 181
3
5 Disabled 1813
TACACS+ Authentication Server Configuration:
============================================
Server Mode IP Address Secret Port
------
-------- --------------- ------------------------------ -----
1 Disabled 49
2 Disabled 49
3 Disabled
49
4 Disabled 49
5 Disabled 49
Security AAA Timeout
Description:
Set or show server timeout.
Syntax:
Security AAA Timeout [<timeout>]
Parameters:
<timeout>: Server response timeout (3-3600 seconds)
(default: Show server timeout configuration)
Default Setting:
15
Example:
Set 30sec for server timeout
NS3552
-8P-2S-V2:/>security aaa timeout 30
Security AAA Deadtime
Description:
Set or show server dead time.
Syntax:
Security AAA Deadtime [<dead_time>]
Parameters:
<dead_time>: Time that a server is considered dead if it doesn't answer a request
(0-3600 seconds)
(default: Show server dead time configuration)
Default Setting:
300
Example:
Set 1000sec for server dead time
NS3552
-8P-2S-V2:/>security aaa deadtime 1000
Security AAA RADIUS
Description:
Set or show RADIUS authentication server setup.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English