Interlogix NS3552-8P-2S-V2 - Page 397

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 395
Syntax:
Security AAA RADIUS [<server_index>] [enable|disable] [<ip_addr_string>]
[<secret>] [<server_port>]
Parameters:
The server index (1-5)
(default: Show RADIUS authentication server configuration)
enable : Enable RADIUS authentication server
disable : Disable RADIUS authentication server
(default: Show RADIUS server mode)
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
<secret> : Secret shared with external authentication server.
To set an empty secret, use two quotes ("").
To use spaces in secret, enquote the secret.
Quotes in the secret are not allowed.
<server_port> : Server UDP port. Use 0 to use the default RADIUS port (1812)
Example:
Set RADIUS authentication server configuration.
NS
3552-8P-2S-V2:/>
security
aaa radius 1 enable 192.168.0.20 12345678
1812
Security AAA ACCT_RADIUS
Description:
Set or show RADIUS accounting server setup.
Syntax:
Security AAA ACCT_RADIUS [<server_index>] [enable|disable] [<ip_addr_string>]
[<secret>] [<server_port>]
Parameters:
The server index (1-5)
(default: Show RADIUS accounting server configuration)
enable : Enable RADIUS accounting server
disable : Disable RADIUS accounting server
(default: Show RADIUS server mode)
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
<secret> : Secret shared with external accounting server.
To set an empty secret, use two quotes ("").
To use spaces in secret, enquote the secret.
Quotes in the secret are not allowed.
<server_port> : Server UDP port. Use 0 to use the default RADIUS port (1813)
Example:
Set RADIUS accounting server configuration.
NS3552
-8P-2S-V2:/>
security
acct_radius 1 enable 192.168.0.20 12345678
1813
Security AAA TACACS+
Description:
Set or show TACACS+ authentication server setup.
Syntax:
Security AAA TACACS+ [<server_index>] [enable|disable] [<ip_addr_string>]