Interlogix NS3552-8P-2S-V2 - Page 402

Chapter 6: Command line mode
400 NS3552-8P-2S-V2 User Manual
STP Status [<msti>] [<port_list>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all', default: All ports
Default Setting:
Disable
Example:
Show STP Bridge status.
NS3552
-8P-2S-V2:/>
stp
status
CIST Bridge STP Status
Bridge ID : 80:00
-00:30:4F:24:04:D1
Root ID : 80:00
-00:30:4F:24:04:D1
Root Port :
-
Root PathCost: 0
Regional Root: 80:00
-00:30:4F:24:04:D1
Int. PathCost: 0
Max Hops : 20
TC Flag : Steady
TC
Count : 0
TC Last :
-
Port Port Role State Pri PathCost Edge P2P Uptime
---------
-------------- ---------- --- -------- ---- --- -------------
10 DesignatedPort Forwarding 128 20000 Yes
Yes 0d
00:10:32
STP MSTI Priority
Description:
Set or show the bridge instance priority.
Syntax:
STP Msti Priority [<msti>] [<priority>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<priority> : STP bridge priority (0/16/32/48/.../224/240)
Default:
128
Example:
Set MST1 priority value in 48.
NS3552
-8P-2S-V2:/>stp msti priority 1 48
STP MSTI Map
Description:
Show or clear MSTP MSTI VLAN mapping configuration.
Syntax:
STP Msti Map [<msti>] [clear]
Parameters:
<msti>: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
Clear : Clear VID to MSTI mapping
Example: