Interlogix NS3552-8P-2S-V2 - Page 414

Chapter 6: Command line mode
412 NS3552-8P-2S-V2 User Manual
<interval>: LLDP transmission interval (5-32768)
Default Setting:
30
Example:
Set transmission interval in 10
NS3552
-8P-2S-V2:/>lldp interval 10
LLDP Hold
Description:
Set or show LLDP Tx hold value.
Syntax:
LLDP Hold [<hold>]
Parameters:
<hold>: LLDP hold value (2-10)
Default Setting:
3
Example:
Set LLDP hold value in 10
NS3552
-8P-2S-V2:/>lldp hold 10
LLDP Delay
Description:
Set or show LLDP Tx delay.
Syntax:
LLDP Delay [<delay>]
Parameters:
<delay>: LLDP transmission delay (1-8192)
Default Setting:
2
Example:
Set LLDP delay value in 1
NS3552
-8P-2S-V2:/>
lldp delay 1
LLDP Reinit
Description:
Set or show LLDP reinit delay.
Syntax:
LLDP Reinit [<reinit>]
Parameters:
<reinit>: LLDP reinit delay (1-10)