Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 479
(default: Set or show digital input/output/fault alarm 0/1 status)
DIDO DI Desciption
Description:
Set or show the system digital input0/1 description.
Syntax:
DIDO Di_desc [first|second] [<description>]
Parameters:
first : Digital Input/Output 0
second : Digital Input/Output 1
(default: Set or show digital input/output first(0)/second(1) select)
<description>: Digital input0/1 described string. Use 'clear' or "" to clear the string
In CLI, no blank or space characters are permitted as part of a contact.
DIDO DI Enable
Description:
Set or show the system digital input0/1.
Syntax:
DIDO Di_en [first|second] [enable|disable] [hightolow|lowtohigh]
Parameters:
first : Digital Input/Output 0
second : Digital Input/Output 1
(default: Set or show digital input/output first(0)/second(1) select)
enable : Enable digital input0/1 function
disable : Disable digital input0/1 function
(default: Set or show digital input/output/fault alarm 0/1 status)
hightolow : Trigger -> high to low
lowtohigh : Trigger -> low to high
(default: Set or show digital input/output 0/1 trigger)
DIDO DO Act
Description:
Set or show the system digital output0/1 action.
Syntax:
DIDO Do_act [first|second] [port|power] [enable|disable]
Parameters:
first : Digital Input/Output 0
second : Digital Input/Output 1
(default: Set or show digital input/output first(0)/second(1) select)
port : port fail
power : power fail
DI1 : DI1 trigger
DI2 : DI2 trigger
(default: Set or show digital output/fault alarm 0/1 action)
enable : Enable digital input0/1 function
disable : Disable digital input0/1 function
(default: Set or show digital input/output/fault alarm 0/1 status)

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English