Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 49
Privilege levels
This page provides an overview of the privilege levels. After setup is complete, click the
Save button and log in to the web interface with the new user name and password. The
following appears:
This page includes the following fields:
Object Description
Group name The name identifies the privilege group. In most cases, a privilege level group
consists of a single module (e.g., LACP, RSTP, or QoS), but a few of them
contain more than one. The following description defines these privilege level
groups in detail:
System: Contact, Name, Location, Timezone, Log.
Security: Authentication, System Access Management, Port (contains Dot1x
port, MAC based and the MAC Address Limit), ACL, HTTPS, SSH, ARP
Inspection, and IP source guard.
IP: Everything except 'ping'.
Port: Everything except 'VeriPHY'.
Diagnostics: 'ping' and 'VeriPHY'.
Maintenance: CLI- System Reboot, System Restore Default, System
Password, Configuration Save, Configuration Load and Firmware Load. Web-
Users, Privilege Levels and everything in Maintenance.
Debug: Only present in CLI.
To Next Page
Loading...
