Chapter 4: Web configuration
50 NS3552-8P-2S-V2 User Manual
Object Description
Privilege Level Every privilege level group has an authorization level for the following sub
groups:
Configuration read-only
Configuration/execute read-write
Status/statistics read-only
Status/statistics read-write (e.g., for clearing of statistics)
User privilege should be the same or greater than the authorization privilege
level to have the access to that group
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
NTP configuration
Configure NTP on this page. NTP is an acronym for Network Time Protocol, a network
protocol for synchronizing the clocks of computer systems. NTP uses UDP (data
grams) as a transport layer. You can specify NTP servers and GMT time zone in this
page.
This page includes the following fields:
Object Description
Mode Indicates the NTP mode operation. Possible modes are:
Enabled: Enable NTP mode operation. When enabling NTP mode operation,
the agent forwards and transfers NTP messages between the clients and the
server when they are not on the same subnet domain.
Disabled: Disable NTP mode operation.
Time zone Permits time zone selection according to current location of the switch.
Server# Provides the NTP IPv4 or IPv6 address of this switch. IPv6 address is in 128-
bit records represented as eight fields of up to four hexadecimal digits with a
colon separating each field (:).
To Next Page
Loading...
