Interlogix NS3552-8P-2S-V2 User Manual

Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 59
• Click << to update the system log entries, ending at the last entry currently
displayed.
• Click >> to update the system log entries, starting from the last entry currently
displayed.
• Click >>I to update the system log entries, ending at the last available entry ID.
• Click Print to print the system log entry to the current entry ID.
Remote syslog
The System Log Configuration page displays the industrial managed switch remote
system log information details.
The page includes the following fields:
Object Description
Mode Indicates the server mode operation. When the mode operation is
enabled, the syslog message is sent to the syslog server. The syslog
protocol is based on UDP communication and received on UDP port
514. The syslog server will not send acknowledgments back to
sender since UDP is a connectionless protocol and it does not
provide acknowledgments. The syslog packet is always sent out even
if the syslog server does not exist. Selections include:
Enabled: Enable remote syslog mode operation.
Disabled: Disable remote syslog mode operation.
Syslog Server IP Indicates the IPv4 host address of syslog server. If the switch
provides the DNS feature, it also can be a host name.
Syslog Level Indicates what kind of message is sent to the syslog server.
Selections include:
Info: Send information, warnings, and errors.
Warning: Send warnings and errors.
Error: Send errors.
Buttons
• Click Save to apply changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English