Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 85
Object Description
contiguous zeros; but it can appear only once. It can also represent a
legally valid IPv4 address. For example, '::192.1.2.34'.
Trap Authentication Failure Indicates the SNMP entity is permitted to generate authentication
failure traps. Selections include:
Enabled: Enable SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.
Trap Inform Mode Indicates the SNMP trap inform mode operation. Selections include:
Enabled: Enable SNMP trap inform mode operation.
Disabled: Disable SNMP trap inform mode operation.
Trap Inform Retry Times Indicates the SNMP trap inform retry times. The allowed range is 0 to
255.
Trap Inform Timeout
(seconds)
Indicates the SNMP trap inform timeout. The allowed range is 0 to
2147.
Trap Inform Retry Times Indicates the SNMP trap inform retry times. The allowed range is 0 to
255.
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
SNMP system information
The switch system information is provided in the System Information Configuration
page.
The page includes the following fields:
Object Description
System Contact The textual identification of the contact person for this managed node
and information on how to contact this person. The allowed string
length is 0 to 255, and the allowed content is the ASCII characters
from 32 to 126.
System Name An administratively assigned name for this managed node. By
convention, this is the node's fully-qualified domain name. A domain
name is a text string drawn from the alphabet (A-Za-z), digits (0-9),
minus sign (-). No space characters are permitted as part of a name.
The first character must be an alpha character. And the first or last
To Next Page
Loading...
Need help?
General
