Interlogix NS3552-8P-2S-V2 User Manual

Chapter 4: Web configuration
86 NS3552-8P-2S-V2 User Manual
Object Description
character must not be a minus sign. The allowed string length is 0 to
255.
System Location The physical location of this node (e.g., telephone closet, 3rd floor).
The allowed string length is 0 to 255, and the allowed content is the
ASCII characters from 32 to 126.
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
SNMPv3 configuration
SNMPv3 communities
Configure SNMPv3 communities in the SNMPv3 Community Configuration page. The
entry index key is Community.
The page includes the following fields:
Object Description
Delete Select the check box to delete the entry. It will be deleted during the
next save.
Community Name Indicates the security name to map the community to the SNMP
Groups configuration. The allowed string length is 1 to 32, and the
allowed content is ASCII characters from 33 to 126.
Source IP Indicates the SNMP access source address. A particular range of
source addresses can be used to restrict the source subnet when
combined with the source mask.
Source Mask Indicates the SNMP access source address mask.
Buttons
• Click Add New Entry to add a new community entry.
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English