Interlogix TruVision 6 Series User Manual

Installation Guide 29
6. GND for 12 VDC
power
7. Positive pole for 12
VDC power
8. Ethernet RJ45 PoE
port
14. Alarm 1 input
15. Reset button
16. Micro SD card slot
17. SD card cover
Note: To reset the camera to default settings, press and hold
the RESET button and power on the camera. After the camera
has started up, hold the RESET button for an additional 20
seconds.

Interlogix TruVision 6 Series Specifications

General

Brand	Interlogix
Model	TruVision 6 Series
Category	IP Camera
Language	English