2BChapter 3: Camera configuration
34 TruVision IP PTZ Camera Configuration Manual
2. Check the Enable Tamper-proof box (3).
3. Click Draw Area (4). Click and drag the mouse on the live video image to
draw a tamper-proof area.
4. Click Stop Drawing to finish drawing. Click Clear All to delete all areas
marked and restart drawing.
5. Move the Sensitivity slider to set the sensitivity of the detection.
All areas will have the same sensitivity level.
6. Click Edit to edit the arming schedule for tamper-proof alarms. The arming
schedule configuration is the same as that for motion detection. See “To set
up motion detection” for more information.
7. Check the checkbox to select the linkage method taken for the tamper-proof.
8. Click Save to save changes.
Exception alarms
You can set up the camera to notify you when irregular events occur and how
you should be notified. These exception alarms include:
• HDD Full: All recording space of NAS is full.
• HDD Error: Errors occurred while files were being written to the storage, no
storage or storage had failed to initialize.
• Network Disconnected: Disconnected network cable.
• IP Address Conflicted: Conflict in IP address setting.
• Illegal Login: Wrong user ID or password used to login to the cameras.
To Next Page
Loading...
Need help?
General
