2BChapter 3: Camera configuration
TruVision IP PTZ Camera Configuration Manual 29
5. Choose the task type from the drop-down list. You can choose scan, preset,
preset tour, etc.
6. Click Save (6) to save changes.
Park actions
This is the action that will run automatically after the dwell time. A park action can
be, for example, a scan, preset, preset tour, or a shadow tour.
Note: The Scheduled Tasks function (see page 27) has priority over the Park
Action function. If these two functions are set at the same time, only Scheduled
Tasks is enabled.
To define a park action:
1. In the PTZ folder (1), click the Park Action tab (1) to open its window.
2. Check the Enable Park Action checkbox (3).
3. Set the Dwell Time, which is the inactivity time of the dome before it starts
the park actions.
4. Select an action from the Action Type drop-down list (4).
5. Click Save (5) to save changes.
Privacy masks
Privacy masks let you conceal sensitive areas (such as neighboring windows) to
protect them from view on the monitor screen and in the recorded video. The
masking appears as a blank area on screen. You can create up to four privacy
masks per camera.
Note: There may be a small difference in size of the privacy mask area
depending on whether local output or the web browser is used.
To Next Page
Loading...
Need help?
General
