Interlogix TruVision Configuration Manual

4BChapter 5: Camera operation
60 TruVision IP PTZ Camera Configuration Manual
Note: This feature can vary on different cameras.
Using presets
Presets are predefined locations of a PTZ dome camera that allow you to quickly
move the PTZ dome camera to a desired position.
You can only call up the predefined presets. For instance, preset 99 is the “Start
auto scan”. If you call the preset 99, the camera starts auto scan function.
These predefined presets cannot be modified. You cannot set up new presets.
Table 9: Predefined preset settings
Special
Preset
Function Special
Preset
Function
33
Auto flip 93 Set limit stops manually
34
Back to initial position 94 Remote reboot
35
Call preset tour 1 96 Stop a scan
36
Call preset tour 2 97 Start random scan
37
Call preset tour 3 98 Start frame scan
38
Call preset tour 4 99 Start auto scan
39
IR cut filter in 100 Start tilt scan
40
IR cut filter out 101 Start panorama scan
41
Call shadow tour 1 102 Call preset tour 5
42
Call shadow tour 2 103 Call preset tour 6
43
Call shadow tour 3 104 Call preset tour 7
44
Call shadow tour 4 105 Call preset tour 8
92
Start to set limit stops
To set a preset:
1. Select a preset number from the preset list.

Interlogix TruVision Specifications

General

Brand	Interlogix
Model	TruVision
Category	DVR
Language	English