110 xGenConnect Installation and Programming Guide
• The default standard account is “User 2” and PIN 5678.
• EN 50131 Grade 3 default codes are 971300, 123400, 567800.
Programming Sequence
Instructions
1. Open Users
2. Select the User number you want to modify with the Left and Right arrow keys
on the top right. You can also Search, Add, Copy, and Delete a user by
clicking the corresponding button on the toolbar.
3. Enter a first name and/or last name for the user. It is case sensitive and
provides the user name to log in from the UltraSync+ app.
4. Enter a new PIN code for the user. It must be unique and 4 to 8 digits long.
5. Select the user type that you want to apply to this user. Descriptions of each
type are available in xGen Reference Guide.
To Next Page
Loading...
