ZeroWire Installation Manual 37
10. If you need to make changes, open the ZeroWire Web Server and go to Advanced –
Communicator – Radio Configuration:
Only change these settings as instructed by your supplier or telecommunications provider.
Access rights and available menus
The set of accessible menus depends on the access rights of the user logged in the
system.
Main Menu – Installer Code
The screen above shows the ZeroWire’s menu when accessed via installer code when the
installer code is NOT set with master user authorities. Particularly, no User settings are
available to the installer.
Note: The Installer type can only be set via the DLX900 software.
To Next Page
Loading...
