Appendix B — Default Settings
96 CK3 Mobile Computer User’s Manual
Default Configuration
The following tables list the default values of the configuration
commands supported on the CK3. If you restore the CK3to factory
default settings, the CK3 uses these values.
The commands are grouped by function and reflect the organization
of Intermec Settings. For detailed information on most of the
commands, see the Intermec Settings Command Reference Manual,
available from the Intermec web site at www.intermec.com.
Data Collection
Data Collection Settings
Data Collection Setting Default Value
Enable Scanner Port Enable
Enable Scanner Auto-Detect Enable
Scanner Port Baud Rate 38400
Symbology Settings
Symbology Default Value
Australian Post Disable
Aztec Disable
BPO Disable
Canada Post Disable
China Post Disable
Codabar Disable
Codablock A Disable
Codablock F Disable
Code 11 Disable
Code 39 Enable
Code 93 Disable
Code 128/GS1-128 Enable
DataMatrix Enable
Dutch Post Disable
To Next Page
Loading...
Need help?
General
