Chapter 1 — Using the Computer
CK3 Mobile Computer User’s Manual 15
Aligning the Touch Screen
If the touch screen does not respond when you tap it with the stylus,
you may need to calibrate the screen.
To calibrate the touch screen
1 Tap Start > Settings > the Systems tab > Screen.
2 Tap Align Screen and follow the instructions to align the screen.
3 Click ok.
To align the touch screen using the keypad
1 Access the Start menu by pressing .
2 Press the Down button to select Settings.
3 Press Enter.
4 Press the Tab button until the Settings tabs are highlighted.
5 Press the Right Arrow button to select the System tab.
6 Press Tab until the Screen icon is highlighted.
7 Tab to Align Screen and press Enter.
8 Follow the instructions to align the screen.
9 Click ok.
If you are still unable to align the touch screen, you can clean boot the
CK3. For help, see “Clean Booting the CK3” on page 78.
Note: If the touch screen is so out of alignment that you cannot
open the Start menu, you can try to align the screen menu using
the keypad. For help, see the next procedure.
To Next Page
Loading...
Need help?
General
