Chapter 3 — Developing and Installing Applications
CK3 Mobile Computer User’s Manual 61
To download the upgrade files
1 Start your web browser and go to the Intermec web site at
www.intermec.com.
2 Go to Support > Downloads.
3 Click the link to search the product downloads.
4 Select your computer from the Downloads list. The Downloads
page displays all of the downloads available for your computer.
5 Download the upgrade file you need. If you want to upgrade both
the OS and the SSPB, you will need to download both files.
Upgrading the CK3 Using a microSD Card
To use a microSD card to upgrade the computer, you need an SD card
reader and a microSD adapter card formatted as FAT16.
To upgrade the operating system using a microSD card
1 Insert a microSD card into a microSD adapter card and then place
it in the storage card reader connected to your PC.
2 Copy all required OS upgrade files to the microSD card.
3 Remove the battery by pressing the release button.
4 Remove the microSD card from the adapter card and insert it into
the CK3.
5 Place the CK3 with the battery removed, in a dock connected to
external power and press the Reset button (using a stylus) located
in the battery cavity on the back of the CK3. For help, see “Cold
Booting the CK3” on page 77.
6 Remove the microSD card when the Installation Complete menu
appears.
7 Remove the CK3 from the dock and replace the battery.
To upgrade the SSPB using a microSD card
1 Insert a microSD card into a microSD adapter card and then place
it in the storage card reader connected to your PC.
2 Copy all required SSPB upgrade files to the microSD card.
3 Remove the microSD card from the adapter card and insert it into
the CK3.
To Next Page
Loading...
Need help?
General
