Chapter 2 — Connecting and Configuring the CK3
34 CK3 Mobile Computer User’s Manual
To configure 802.11 radio parameters
1 Tap Start > Settings > the Systems tab >Intermec Settings.
2 Tap Communications > 802.11 Radio > Funk Security >
[Profile #] > SSID.
3 Enter your SSID (network name).
4 If you are not using DHCP, tap IP Settings and configure your
network settings.
5 Make sure that your CK3 is talking to the network and that the
network can see your CK3.
6 Configure security. For help, see “Configuring Wireless
Security” on page 40.
Configuring Bluetooth Communications
You CK3 is Bluetooth™-enabled, which lets you connect to other
Bluetooth devices, such as:
• scanners.
• printers.
• audio devices.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
To turn on the Bluetooth radio
1 Tap Start > Settings > the Connections tab > Bluetooth > the
Mode tab.
2 Tap Turn on Bluetooth.
To Next Page
Loading...
Need help?
General
