Chapter 1 — Using the Computer
CK3 Mobile Computer User’s Manual 11
Configuring the Backlight Settings
By default, the CK3 goes into Screen Off mode when there is no
activity on the computer. Screen Off mode turns off the backlight and
display. Press a key or tap the screen to resume activity.
To configure the backlight
1 Tap Start > Settings > the System tab > the Backlight icon > the
Battery Power tab.
2 With Turn off backlight if device is not used for checked, select
the timeout value (10 seconds, 30 seconds, or 1 to 5 minutes).
You can also use Intermec Settings to configure the backlight
settings.
Understanding the Audio Features
The CK3 has a speaker, a microphone, and multiple software tools for
configuring the volume of sounds.
Adjusting the Volume of the Speaker
You can adjust the computer volume for your needs and your
environment. The volume includes sounds you hear when you tap the
screen or scan bar codes with a scanner. You can set the volume to off,
very low, low, medium, high, and very high (default).
To adjust the volume of the speaker with the Volume icon
1 Tap the Volume ( ) icon at the top of the screen.
2 Use your stylus to adjust the volume slider.
You can also use Intermec Settings to adjust the volume.
Using the Push To Talk (PTT) Feature
You can use the PTT feature to:
• record audio on your CK3.
• use your CK3 as a two-way radio.
To Next Page
Loading...
Need help?
General
