Chapter 2 — Connecting and Configuring the CK3
CK3 Mobile Computer User’s Manual 41
Selecting a Funk Security Profile
You can define up to four profiles for Funk security. Different profiles
let your CK3 communicate in different networks without having to
change all of your security settings. For example, you may want to set
up one profile for the manufacturing floor and one for the
warehouse. By default, the active profile is Profile 1.
To select a Funk security profile
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Tap a profile to expand it.
4 (Optional) In the Profile Label text box, enter a meaningful name
for your profile.
5 Configure your security settings. For help, see the next sections.
6 Repeat Steps 3 through 5 for each profile you want to define.
7 Select one profile as the active profile by tapping Active Profile
and choosing a profile from the list.
8 Save your settings.
Funk (default) Funk security offers features that are similar to Microsoft
security, but Funk also offers these features:
• CCX v2.0 compliance
• Support for LEAP and TTLS
• Configuration of up to four profiles
If you are using the CK3 in a static environment that
requires a high level of security, you should use Funk
security.
To use Funk security, you need to select a profile. For help,
see the next section, “Selecting a Funk Security Profile.”
Understanding Microsoft and Funk Security (continued)
Security Choice Description
Note: You can also use the Profile Wizard to configure most wireless
security settings. To start the Profile Wizard, tap the iConnect icon
( ) in the lower right corner of the Today screen and select Tools >
Wireless Settings.
To Next Page
Loading...
Need help?
General
