Appendix B — Default Settings
98 CK3 Mobile Computer User’s Manual
RFID
Scanner Settings
Scanner Setting Default Value
Hardware trigger Enable
Turn Off After Good Read Enable/One-shot
Trigger mode (area imagers only) Level
Imager Settings
Imager Setting Default Value
Predefined Modes 1D and 2D Standard
Sticky Aimer LED duration 0 (disabled)
Signature Image Capture Disable
Decode Security Settings
Decode Security Setting Default Value
Consecutive Data Validation 0
Identical Consecutive Timeout 300 ms
Different Consecutive Timeout 0
Center Decoding Disable
Center Decoding Tolerance Disable
Virtual Wedge Settings
Virtual Wedge Setting Default Value
Virtual Wedge Enable
Grid Null
RFID Settings
RFID Setting Default Value
Enable RFID Service Enable