Chapter 1 — Replacing Parts
CV30 Fixed Mount Computer Service Manual 29
• You can reflash your computer using the SmartSystems Server. For help,
see “Reflashing the CV30 Using SmartSystems Server” on page 30.
You need to download the latest upgrade files from the Intermec web site to
your PC or laptop.
To download the upgrade files
1 Start your web browser and go to the Intermec web site at
www.intermec.com.
2 Go to Service & Support > Downloads.
3 Select Computers: CV30 Fixed Mount from the list.
4 Select the download you need. Make sure the download you select is for
the CV30 computer and that it contains the upgrade you want:
operating system only, SSPB only, or operating system and SSPB.
5 Download the .zip file to your laptop or PC.
6 Use the SD card or SmartSystems server to reflash the CV30.
Reflashing the CV30 Using an SD Card
To reflash the operating system, you need:
• an SD card.
• an SD card reader (optional).
You will need to set the network communications parameters on the CV30
to reestablish communications with the other devices in the wireless
network.
To upgrade the operating system
1 Back up all of the applications and data.
2 Download the latest upgrade (.exe) file from the Intermec web site to
your desktop PC.
3 Double-click the .exe file on your desktop PC. An installation wizard
starts and walks you through the process of extracting the upgrade files.
The installation wizard extracts the upgrade files to:
C:\Program Files\Intermec\<version>
4 Copy all files in this directory to the SD card. Do not copy the .exe file
to the SD card.
5 If you are using an SD card reader, remove the SD card from the CV30
and place it in the reader.
6 Copy the contents of the <version> folder to the SD card.
Note: You cannot install the files for the OS and the SSPB bundle at the
same time. You need to install one and then install the other.
To Next Page
Loading...
